D6740 Dental Code (What Is It, How Much Does It Cost, and How To Read CDT Codes)
Table of Contents
According to the ADA’s CDT dental codes, the D6740 dental code is for a porcelain or ceramic retainer crown. Specifically, the D6740 dental code refers to a prosthetic crown made from porcelain or ceramic that is fitted over a tooth. The category for D6740 is prosthodontics.
Prosthodontics is the branch of dentistry dealing with the replacement of teeth and associated soft and hard tissues. This may be done with prostheses such as crowns, bridges, or dentures. These prostheses can be fixed, removable, or can be supported and retained by implants.
D6740 dental code cost
The typical cost for a D6740 dental code is $600 to $1,391. Insurance agreed rates for the D6740 vary by insurer. For example, the United Health Care Optum dental plan rate is $1,063.41, while some BlueCross dental plans only allow $666.
D6740 CDT dental code description
The D6740 CDT dental code describes a porcelain or ceramic retainer crown under the ADA’s Current Dental Terminology (CDT).
CDT Dental codes are a set of medical codes used to describe dental procedures. Every dental procedure code starts with a D, which is the procedure code. The following four numbers are used to identify the specific procedure that helps in identification, treatment, and billing.
What category does a D6740 CDT code belong to?
The D6740 CDT code belongs to the prosthodontics category. Prosthodontics is the branch of dentistry that deals with the restoration and replacement of teeth. This code is used for procedures such as crowns, bridges, implants, and dentures.
D6740 vs D2740 (What is the difference between these two similar CDT dental codes)
The difference between the D6740 and D2740 dental codes is that D6740 describes a porcelain/ceramic retainer crown while D2740 only describes a porcelain/ceramic crown. So, if the procedure was for a porcelain/ceramic or zirconium retainer crown, you should use D6740. If it was for a porcelain/ceramic or zirconium crown that was not a retainer, you should use D2740.
ADA dental codes 2024
The ADA dental codes for 2024, also called Current Dental Terminology (CDT), are a set of medical codes used to describe the type of dental procedure that was performed. Accurate coding is essential for record-keeping, billing, and insurance purposes.
The first character of every dental code is always a D and is followed by four numbers.
The ADA’s CDT dental codes are categorized into twelve types of procedures:
- Diagnostic
- Preventive
- Restorative
- Endodontics
- Periodontics
- Removable Prosthodontics
- Maxillofacial Prosthetics
- Implant Services
- Fixed Prosthodontics
- Oral and Maxillofacial Surgery
- Adjunctive General Services
D5282 Dental Code
The D5282 CDT dental code describes a removable unilateral partial denture for maxillary teeth that is one piece cast metal.
What is the dental code for a zirconia bridge?
D6245 and D6740 are two dental codes used for Zirconia bridges. D6245 describes a porcelain/ceramic pontic bridge unit while D6740 is used for a porcelain/ceramic crown bridge unit.
What is dental code D6240?
The dental code D6240 is used for a pontic made from porcelain and fused to high noble metal. The average cost of a D6240 procedure code is $1,103.20.
What Is a Dental Procedure Code?
A dental procedure code is a unique identifier that describes the nature of a particular treatment performed on a patient’s teeth. Dental offices use dental codes for insurance, billing, and dental record-keeping purposes. The dental procedural codes may include information about the type of treatment, such as extraction, or the instrument used, such as a drill.
The American Dental Association established a standard set of dental codes in 1973, and it has been revised several times since then. The American Dental Association does not support codes that are not included in its publication of dental codes.
What do dental codes mean?
Dental codes, also referred to as CDT codes, are used to code dental procedures. They can be found in the patient’s chart, and they function as a way for medical professionals to document their work, provide quality care, and ensure proper billing treatment.
The first number is the procedure code, which indicates what type of procedure was performed. The second is the nomenclature or 4 numbers that signify what part of your mouth the dental procedure involved. For example, D6740 refers to a prosthetic crown, made from porcelain or ceramic that is fitted over a tooth.
Dental codes are generally found on a patient’s chart, but they are also listed in dental equipment manuals and online for reference purposes.
What are Prosthodontists?
Prosthodontists (who practice prosthodontics) replace missing teeth, enhance patient esthetics, maintain teeth, and restore teeth. These restorations are used for dental and facial issues using fillings, dentures, veneers, crowns, bridges, or implants to correct orofacial problems.
What Is a Pontic In Dental?
What is a Pontic made of?
Is a Pontic an implant?
What is the difference between a Pontic and a crown?
A Pontic is a type of dental prosthesis used to replace one or more missing teeth. A crown, on the other hand, is a type of dental restoration that is used to cover and protect a tooth that is damaged or decayed.
Is a retainer crown the same as a bridge?
While they are used together in traditional dental bridges, a retainer crown is not the same as a bridge. A retainer crown is a type of dental crown that is used to support a dental bridge. Retainer crowns, which are usually made of metal, are cemented onto the natural tooth that is adjacent to the missing tooth. A bridge is then attached to the retainer crown, and this helps to fill in the gap created by the missing tooth.